NOZ2 Ceiling Mounted Industrial Heater

NOZ2 Ceiling Mounted Industrial Heater

The Noz2 range was specifically designed for large rooms and buildings with high ceilings such as factories, retail outlets, sports centres, exhibition halls, and large warehouses. The innovative multi-directional design induces movement in the air around the unit. This ensures energy efficient temperature distribution that provides warm air is distributed evenly throughout the room.

Adjustable Discharge Nozzles – Warm air naturally rises and this makes it hard for large rooms with high ceilings to maintain a warm temperature.
NOZ2 heaters capture the warm air at ceiling height and optimise its distribution to the floor level using the inductive effect. When used with Biddle’s intelligent automatic controls, the fan speed and heat output are automatically adjusted. This ensures a consistent, comfortable climate is maintained at floor level without any user intervention.

Product Brochure

Make a trade enquiry

Features & benefits

  • Optimal air distribution: fewer devices required to heat or cool large areas
  • Optional automatic control
  • High-performance stepless EC-fans
  • Easy to operate & maintain
  • Adjustable discharge pattern
  • Minimal heat loss
  • Reduced installation costs due to fewer units required

Technology

Optimum Air Distribution by Induction – Biddle’s innovative NOZ2 technology minimises temperature differences in the room and heat loss to the outside environment. Warm air is forced downwards at speed, from ceiling height to floor level through six multi-directional nozzles.
The high velocity of the air leaving the unit circulates the warm air throughout the room. This is known as the inductive effect. The inductive effect allows for better air distribution, so fewer units are needed to heat or cool large spaces. With an induction airflow rate of 10 times the primary air displacement, the NOZ2 temperature gradient is only 0.25 °C per metre. This makes it far more efficient than conventional air movement products, delivering significant energy savings.

Biddle’s industry-leading CHIPS technology constantly searches for the best possible mix of air volume and heat. With conventional air heaters only the fan speed is automatically controlled so air volume and heat are interlinked. With CHIPS technology air movement and heat output are controlled independently to deliver optimum performance.

To achieve optimum air distribution throughout the room, and ensure warm air always reaches the floor level, the nozzles need to be set at the correct angle. This is determined by the floor area to be heated or cooled and the height of the room.

Controls

Automatic Control

  • Self-regulating
  • Always the correct setting
  • Intelligent software
  • b-touch control panel
  • Modbus communication

B-Control

  • Stepless control (0-10 V)
  • On/Off (room thermostat)
  • EC Fans
  • Easy to set
  • Control multiple devices

Biddle-NOZ-brochure

Biddle NOZ – technical-brochure

Biddle NOZ2-manual-v7.3


Related Products

  • Vertical Uniflow

    UNIFLOW Air Heater

    Uniflow technology offers the choice of operating on low, medium or high pressure hot water or steam. This means that most existing factories or commercial units need no major or expensive capital installation before an effective heating solution can be found. Uniflow unit heaters can be installed in the widest variety of locations from factories and warehouses to exhibition halls and showrooms.

    The two discharge options – downward or horizontal – meet all likely space configurations. Downward discharge is particularly suited to complex areas where obstacles might impede airflows from a horizontal system. The horizontal louvred discharge units are ideal for where directional heating is required e.g. along production lines.

    Five sizes with one, two or three row heating elements depending on performance requirement and heating medium

  • Noz2 Ceiling Mounted Industrial Heater

    NOZ2 Ceiling Mounted Industrial Cooling

    The Noz2 range was specifically designed for large rooms and buildings with high ceilings such as factories, retail outlets, sports centres, exhibition halls, and large warehouses. The innovative multi-directional design induces movement in the air around the unit. This ensures energy efficient temperature distribution that provides warm or cool air is distributed evenly throughout the room.

    The main difference between our products and other air handling units is the number of air outlets. Whereas most of the products on the market have one nozzle, our products have six, hence the name ‘NOZ.’ As each nozzle can be pointed in a different direction, NOZ2 units have a greater area of influence than conventional air handling units, so fewer units are needed to heat or cool large spaces. The nozzles can be individually positioned to direct warm air away from workstations to avoid drafts, or where appropriate, to channel cool air into workspaces to maximise comfort.